Here are some of the areas where Owatrol Blackbat 2 in 1 can be used:
- Fenders
- Inflatables (PVC, Hypalon, Neoprene)
- Hulls and Decks
- Paints and Metal Surfaces
- Non-Slip Surfaces
- Transoms
- Exhaust Outlets
- Waterlines
- Vinyl and Leatherette
- Covers and Biminis
Applying Owatrol’s Blackbat 2-in-1
Apply Blackbat 2-in-1 to the surface using a brush or sprayer and leave it to work for 5 minutes. Next rub the surface with a clean cloth or soft scrubbing rush and rinse with fresh water. Repeat the process if required.
For very dirty surfaces we would recommend soaking your cloth or scrubbing brush in Owablack and scrubbing it onto the surface in a circular motion. If the surface is hot, dampen with water to cool before applying Owablack.
Dilutions
Do not dilute.
Clean up
Clean all tools and equipment with water. Cloths and sponges soaked in Owablack should be laid out flat to dry before disposing with the normal household waste.
Things to Remember
Do not apply to surfaces in direct sunlight during the hottest hours of the day
Do not use wire brushes to scrub he surface
Protect surfaces you do not wish to treat
Always test on a small, inconspicuous area first
Use appropriate protective clothing – gloves, goggles, etc.