X705 A2

The X705 A2 filteris a reusable product for half masks and two-filter masks. The X705 A2 absorber with bayonet connector protects against organic gases and vapours of organic substances with a boiling point above 65°C (brown colour) at a volume concentration in the air not exceeding 0.5%. The trapezoidal design of the housing provides a better field of vision. The X705 A2 filter has a bayonet connector and should be used with X6 and X7 series half masks and X8 series full face masks.

Restrictions Do not use in an environment where the oxygen concentration is less than 17 % and in the presence of unknown gases.

X501 Pre-filter coverfor absorbers

Thepre-filter cover allowsthe combination of particle f ilter X7N11 P2RD with absorbers X701 A1, X702 A1E1, X703ABEK1, X705A2.Sucha set extends protection beyond gasesandvapoursto dust protection. Canbe combined with absorbers X701 A1, X702 A1E1, X703 ABEK1, X705A2and thus used with half-masksX6 and X7 seriesand full-face masks X8 series.

OxyPRO X7N13 P3 D Particulate Prefilter

The X7N13 P3 D filter replaceable, reusable, for half-masks and double-filter masks. Can be pre-filtered by attaching it with cap X501 to absorbers X701 A1, X702 A1E1, X703 ABEK1. Can be used for more than one work shift. It is recommended not to exceed three work shifts. The X7N13 P3 D filter when combined with a suitable two-filter respirator or full-face mask protects the respiratory system against non-toxic and medium-toxic water-based aerosols (dust, smoke, mist).
The X7N13 P3 D filters do not have a bayonet connector and therefore they should only be used with the X501 cap in combination with the X701 A1, X702 A1E1, X703 ABEK1 filters. Can be used with half masks X6 and X7 series and full face masks X8 series.